Add:9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou
How to do Power Splitter
It is not easy to build a brand out of the country's economic situation continues to improve, and vigorously promote the construction of a conservation-oriented society and vigorously develop energy-saving products in the background, with energy-saving products Power Splitter ushered in new development opportunities and unprecedented Expansion capacity. The majority of enterprises should take advantage of and take a positive strategy to strengthen the Power Splitter industry, to improve the overall level of China's Power Splitter industry to make its own contribution.
1, one is to continue to promote the energy efficiency of hydraulic products, so that Power Splitter users can clear Power Splitter energy-saving principle, to realize that Power Splitter to the user to bring direct and indirect economic benefits, but also to create Huge social benefits
2, is to broaden the application of Power Splitter, expand exports. It should be said that at present, China's Power Splitter applications have yet to be further widened, in some industries is not ideal. This requires companies to consolidate the existing results on the basis of the work done more fine, do better, improve the market share of products. At the same time, we should strive to expand the export of products, the product into the international market, thereby enhancing China's Power Splitter in the international influence.
3, is to strengthen the industry's system construction and management, and gradually correct the industry's non-standard competition behavior, so as to protect the industry's overall interests and industry sustained and healthy development.
4, is to strengthen the development of new products, in particular, to focus on the Power Splitter transmission research and development. Power Splitter drive market prospects, at present, the domestic manufacturers and smaller, most still rely on imports. Therefore, to strengthen the Power Splitter transmission research and development, both to improve the technological content of products and market competitiveness of the important work, but also the future direction of Power Splitter. As long as it helps to improve the overall strength of enterprises and the whole industry, this research and development work can be independent research and development, cooperation, joint ventures, the introduction of a variety of ways.
5, is to further improve product quality, improve product reliability. To fully understand the quality of products, the enterprise is the importance of the development of the entire industry. Quality is credibility, that is, the market. If there is no excellent product quality as a guarantee, then the future of the enterprise and the development of the industry will become an empty talk.
6, is to strengthen the association's service work. In the technical exchanges, statistical information analysis, online login, product development, cooperation and cooperation, consulting training for enterprises to create favorable conditions, solid business for the enterprise to do something practical, the association really become a member of the family, continue to enhance the association's Cohesion, for enterprises and society to make greater contributions.
Power Splitter There is a Power Splitter turbine short blade, sometimes due to its own or external reasons this turbine short leaves will find the size of the length of the cracks, and no cracks in the phenomenon of this phenomenon may be due to short-blade only one end of welding There is no fixed point on the top and outer ends of the pump body, resulting in the occurrence of cracks in the medium blade. And then repair this defect must be welding cracks, Power Splitter manufacturers today to explain to you about Power Splitter turbine short blade welding should pay attention to what
1, Power Splitter wheel short blade re-welding using sub-welding, this welding method is to prevent the welding part of the blade because the welding temperature overheating and thus lead to deformation, to avoid hot cracking phenomenon.
2, the welding port is strictly prohibited in the gap plus plugging if the Power Splitter turbine short blade individual local area is too large should be an effective program to try to trim to the specified size, should not be welded
3, in order to ensure the quality of welding to ensure that the groove size should be reduced by the amount of metal to do so in order to reduce the welding stress and deformation.
4, in order to prevent the corner or edge overflow, penetration, with pores, gap slag, not fused, not filled and so defects. Weld metal surface welding wave to achieve no crack
CenRF Communications Limited
Add：9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou