Home > News > Content

Product Categories


  • Add:9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou

  • M.B: +86-18969122786

  • TEL: +86-571-86631886

  • FAX: +86-571-89930536

  • Email:sales@cenrf.com

How To Set Up The WiFi Repeater
Jan 12, 2018

How to set up the WiFi repeater

Step of setting the repeater computer

1, first put the product in the socket, power indicator light to express normal work;

2, with a laptop computer search and connect the wavlink-repeater signal repeater (repeater and notebook computer or can be directly connected with the cable) (Note: if unable to connect the computer to the IP instead of manual input:, after determining the third step);

3. After connecting the signal to the repeater, input in the browser's address bar: enters the setting interface;

4, the input user name and password are all admin, after the successful login, select the relay mode, to the next step;

5. After choosing the name of the router that needs to be connected, the name of the repeater is changed to the name you can remember easily.

6, input the password of the original router, click confirmation is set up successfully.

In addition, the following installation techniques are also considered:

1. install a repeater at a position where the signal is very good. In order to make the repeater work properly, this can greatly reduce the occurrence of the problem.

2. upgrade the firmware of the repeater. Before the installation process is done, check whether your repeater has the latest firmware version.

3. configure the IP address. It is necessary to ensure the uniqueness of the repeater address and to be the IP address range that the wireless network connection can confirm. In most cases, the default IP address can be used, but you need to check the existing access points to confirm it.

4. configure SSID. You want to set it exactly the same as the SSID on the existing network. If we don't do this step, repeaters will never work. Unless the repeater fails, it will automatically scan adjacent access points and automatically configure the user.

5. configure the radio frequency channel. The user needs to set radio frequency on the repeater to match the settings on the existing access point. This is similar to SSID, and if the channel is set not the same as the access point, the repeater will not work properly.

CenRF Communications Limited
Add:9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou
Contact:Alan Huang
Tel: +86-571-86631886
Fax: +86-571-89930536
Mobile: +86-18969122786

Quick Navigation
  • About Us
  • Product
  • Download
  • Service
  • News
  • Contact Us
  • Newsletter
    Enter in your email address to receive deals and coupons.
    +86-571-86631886 sales@cenrf.com