Add:9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou
RP repeater is a device to connect network lines. It is commonly used for bidirectional forwarding between two network nodes. The repeater is the simplest network interconnected device, which mainly completes the function of the physical layer, and is responsible for transmitting information on the physical layer of the two nodes, and completing the function of copying, adjusting and amplifying the signal in order to extend the length of the network. Because of the loss, the signal power transmitted on the online road will gradually decay. When it reaches a certain level, it will cause signal distortion, which will lead to the reception error. Repeater is designed to solve this problem. It completes the connection of physical lines, amplifies the attenuated signals, and keeps the same data as the original ones. In general, the two ends of repeaters are connected by the same media, but some repeaters can also complete the transfer work of different media. Theoretically speaking, repeaters are infinite and network can be extended indefinitely. In fact, this is not possible, because the network standards are specific to the delay range of the signal, the repeater can only work within the scope of this regulation, otherwise it will cause the network failure.
CenRF Communications Limited
Add：9F, Dongguan Building, Jiangnan Ave 4288, Binjiang District, Hangzhou